The ComfyRay™ DX 1.5 Plus Complete Starter Kit is a complete holding system for DEXIS digital sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ DX 1.5 Plus complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ DX 1.5 Plus + ClikGuide™ are all you need to get all the images you need.   The ComfyRay™ DX 1.5 Plus Complete Starter Kit includes: (2) ComfyRay™ XT Holders (2) ClikGuide™ "G" (Ring + Rod)     Size 1.5 Light Green - Item #001-206    

Read more less

    ClikRay™ Holder for DEXIS ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder for DEXIS 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "D" - Item #001-480 ClikRay™ "DPV" - Item #001-497      

Read more less

    D-Series Sensor Holder Bite Blocks fit sensors such as DEXIS and Gendex Size 2. Precise Fit holders are available in size 1.5 holders. ClikRay™ D-Series bite blocks are colored according to plane so choosing the appropriate holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder  from other manufacturers. D-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.    Size 1 Posterior - Rose - Item # 001-909 Anterior - Rose - Item #001-916 Horizontal BW - Rose - Item #001-893 Vertical BW - Rose - Item #001-886 Size 2 Posterior - Purple - Item # 001-862 Anterior - Purple - Item #001-879 Horizontal BW - Purple - Item #001-855 Vertical BW - Purple - Item #001-848        

Read more less

    ClikRay™ Complete Starter Kit for Dexis The ClikRay™ Complete Starter Kit for Dexis is a complete holding system for Dexis and Dexis Platinum sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and endodontic views. It is flexible by design and uses only one autoclave bag for an entire system.  The ClikRay™ complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikRay™ + ClikGuide™ are all you need to get all the images you need. ClikRay™ “D” has a standard horizontal biteplane on one end for both posterior and bitewing views and no biteplane on the other end for anterior and endodontic use. ClikRay™ “DPV” has an enhanced horizontal biteplane for pedodontic as well as endodontic uses along with a vertical biteplane for anterior and vertical bitewing views. ClikRay™ for DEXIS® is available as a system with “D” + “DPV” + “G” ring & rod or separately as 5 packs of “D” or “DPV” holders.   The ClikRay™ Complete Starter Kit for Dexis includes: One ClikRay™ "D" Holder One ClikRay™ "DPV" Holder One ClikGuide™ "G" (Ring + Rod)     Biodegradeable Green - Item #001-510    

Read more less

    The ShaRing™ X-Series Complete Starter Kit is a complete holding system for thinner digital sensors such as Apex, Dentimax, Schick, and XDR. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ X-Series Complete Starter Kit includes: One Sharing™ ** One set of Litening Rods™ Eight Assorted Bite Blocks  **Size 1 & 2 come with both Size 1 ShaRing™ and Size 2 ShaRing™      Size 1 & 2 Item #001-756 Size 1 Item # 001-688 Size 2 Item #001-695    

Read more less