Green Endo Ring

Read more less

Yellow Posterior Ring

Read more less

Blue Anterior Ring

Read more less

Red Bitewing Ring

Read more less

Complete system with one ring and one rod. Ring is backward compatible with XCP ORA Ring. Rod is backward compatible with Dentsply ORA Rod. All parts are interchangeable

Read more less

    The ComfyRay™ Complete Starter Kit is a complete holding system for digital sensors. It eliminates the need for multiple rings, rods and pins of older obsolete systems. The ComfyRay™ complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ + ClikGuide™ are all you need to get all the images you need. The ComfyRay system in size 1 and 2 now fits the popular Carestream, Gendex and Schick /Sirona ELITE 33 sensors. Easy fit, minimal weight and excellent patient comfort. Size 0 sensors fit horizontally on the vertical end of the ComfyRay holder   The ComfyRay™ Complete Starter Kit includes: (2) ComfyRay™ Holders  (2) "G" ClikGuide™ (Ring + Rod)     Size 1 White - Item #001-787 Size 2 Purple - Item #001-770    

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™. Size 0 sensors fit horizontally on the size 2 vertical end of the KV holder.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "K1" Size 1 - Tan -  Item #001-107 ClikRay™ "K2" Size 2 - Dark Blue - Item #001-091 ClikRay™ "KV" Size 1/2 - Dark Yellow - Item #001-114      

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    Z-Series Sensor Holder Bite Blocks fit sensors such as Carestream RVG, Schick Elite/33, Kodak. Precise Fit holders are available in size 2 Purple holders and size 1 Rose holders. ClikRay™ universal bite blocks are colored according to their sizes so choosing the appropriate sized holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder from other manufacturers.   Z-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.    Size 1 Posterior - Rose - Item # 001-909 Anterior - Rose - Item #001-916 Horizontal BW - Rose - Item #001-893 Vertical BW - Rose - Item #001-886 Size 2 Posterior - Purple - Item # 001-862 Anterior - Purple - Item #001-879 Horizontal BW - Purple - Item #001-855 Vertical BW - Purple - Item #001-848        

Read more less

    The ClikStik™ CCD Complete Starter Kit is a complete holding system for all digital sensors. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit.    The ClikStik™ CCD Complete Starter Kit includes: One Size 1 ClikStik™ Holder One Size 2 ClikStik™ Holder One Ring One Rod Eight Assorted Bite Blocks     Item #001-282    

Read more less

    The ShaRing™ Z-Series Complete Starter Kit is a complete holding system for digital sensors such as Carestream RVG and Shick Elite/33. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Z-Series Complete Starter Kit includes: One Sharing™  One set of Litening Rods™ Eight Assorted Bite Blocks      Size 1 Item # 001-930 Size 2 Item #001-923    

Read more less

    The ClikStik™ is a fully autoclaveable, twin head holder for use with ANY x-ray film or digital sensor bite-blocks. One ClikStik™ system can take anterior, posterior and bitewing views with a simple straight rod and one single ring. Now you can eliminate a multitude of rings and bent rods, and have unlimited versatility for the dental office staff. A complete series of radiographs has become a simple one ring process saving time and money for every office.   The ClikStik™ System includes: (2) ClikStik™  (1) Ring (1) Rod     Item #001-220      

Read more less

    The ShaRing™ Bonus Pack is a holding system for systems. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Bonus Pack includes: One Sharing™  One set of Litening Rods™     Item #001-701      

Read more less

    ClikRay™ Sensor Covers was designed by a dentist to be comfortable and easy to use. It's only barrier bag you will ever need! There are rounded corners for maximum patient comfort, and extended lip for easy sensor insertion. Each cover has its size imprinted individually. 34 mm Size 1:  fits all size 0 and 1 sensors 36 mm Size 1+2: fits Kodak size 1, and thinner original Schick  Size 2 sensors,Dent-X, and Suni 40 mm Size 2: fits DEXIS, Kodak Size 2, Schick ELITE Size 2 Sensors, Gendex, XDR and all other Size 2 sensors regardless of manufacture 40 mm Universal Biodegradeable: fits all Size 2 sensors regardless of manufacture   ClikRay™ Sensor Cover include: (1) Box - Sensor Covers at 500 per box     34 mm Size 1 - Item #001-138 36 mm Size 1 + 2 - Item #001-145 40 mm Size 2 - Item #001-152 40 mm Universal Biodegradeable - Item #001-442        

Read more less

    The ComfyRay™ XT Skinny Complete Starter Kit is a complete holding system for thinner digital sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ XT Skinny complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ XT Skinny + ClikGuide™ are all you need to get all the images you need.   The ComfyRay™ XT Skinny Complete Starter Kit includes: (2) ComfyRay™ XT Holders (2) "G" ClikGuide™ (Ring + Rod)     Size 1 Rose - Item #001-800 Size 2 Light Blue - Item #001-794    

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "01" - Size 0, 1 - Item #001-053 ClikRay™ "U" - Size 2 - Item #001-015      

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "T1" Size 1 - Yellow -  Item #001-084 ClikRay™ "T2" Size 2 - Gray - Item #001-077 ClikRay™ "KV" Size 2 - Dark Yellow - Item #001-114    

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    Z-Series Sensor Holder Bite Blocks fit sensors such as Carestream RVG, Schick Elite/33, Kodak. Precise Fit holders are available in size 2 Purple holders and size 1 Rose holders. ClikRay™ universal bite blocks are colored according to their sizes so choosing the appropriate sized holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder from other manufacturers.   Z-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.    Size 1 Posterior - Rose - Item # 001-909 Anterior - Rose - Item #001-916 Horizontal BW - Rose - Item #001-893 Vertical BW - Rose - Item #001-886 Size 2 Posterior - Purple - Item # 001-862 Anterior - Purple - Item #001-879 Horizontal BW - Purple - Item #001-855 Vertical BW - Purple - Item #001-848        

Read more less

    The ClikStik™ CCD Complete Starter Kit is a complete holding system for all digital sensors. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit.    The ClikStik™ CCD Complete Starter Kit includes: One Size 1 ClikStik™ Holder One Size 2 ClikStik™ Holder One Ring One Rod Eight Assorted Bite Blocks     Item #001-282    

Read more less

    The ShaRing™ Z-Series Complete Starter Kit is a complete holding system for digital sensors such as Carestream RVG and Shick Elite/33. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Z-Series Complete Starter Kit includes: One Sharing™  One set of Litening Rods™ Eight Assorted Bite Blocks      Size 1 Item # 001-930 Size 2 Item #001-923    

Read more less

    The ClikStik™ is a fully autoclaveable, twin head holder for use with ANY x-ray film or digital sensor bite-blocks. One ClikStik™ system can take anterior, posterior and bitewing views with a simple straight rod and one single ring. Now you can eliminate a multitude of rings and bent rods, and have unlimited versatility for the dental office staff. A complete series of radiographs has become a simple one ring process saving time and money for every office.   The ClikStik™ System includes: (2) ClikStik™  (1) Ring (1) Rod     Item #001-220      

Read more less

    The ShaRing™ Bonus Pack is a holding system for systems. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Bonus Pack includes: One Sharing™  One set of Litening Rods™     Item #001-701      

Read more less

    The ComfyRay™ Complete Starter Kit is a complete holding system for digital sensors. It eliminates the need for multiple rings, rods and pins of older obsolete systems. The ComfyRay™ complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ + ClikGuide™ are all you need to get all the images you need. The ComfyRay system in size 1 and 2 now fits the popular Carestream, Gendex and Schick /Sirona ELITE 33 sensors. Easy fit, minimal weight and excellent patient comfort. Size 0 sensors fit horizontally on the vertical end of the ComfyRay holder   The ComfyRay™ Complete Starter Kit includes: (2) ComfyRay™ Holders  (2) "G" ClikGuide™ (Ring + Rod)     Size 1 White - Item #001-787 Size 2 Purple - Item #001-770    

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™. Size 0 sensors fit horizontally on the size 2 vertical end of the KV holder.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "K1" Size 1 - Tan -  Item #001-107 ClikRay™ "K2" Size 2 - Dark Blue - Item #001-091 ClikRay™ "KV" Size 1/2 - Dark Yellow - Item #001-114      

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    Z-Series Sensor Holder Bite Blocks fit sensors such as Carestream RVG, Schick Elite/33, Kodak. Precise Fit holders are available in size 2 Purple holders and size 1 Rose holders. ClikRay™ universal bite blocks are colored according to their sizes so choosing the appropriate sized holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder from other manufacturers.   Z-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.    Size 1 Posterior - Rose - Item # 001-909 Anterior - Rose - Item #001-916 Horizontal BW - Rose - Item #001-893 Vertical BW - Rose - Item #001-886 Size 2 Posterior - Purple - Item # 001-862 Anterior - Purple - Item #001-879 Horizontal BW - Purple - Item #001-855 Vertical BW - Purple - Item #001-848        

Read more less

    The ClikStik™ CCD Complete Starter Kit is a complete holding system for all digital sensors. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit.    The ClikStik™ CCD Complete Starter Kit includes: One Size 1 ClikStik™ Holder One Size 2 ClikStik™ Holder One Ring One Rod Eight Assorted Bite Blocks     Item #001-282    

Read more less

    The ShaRing™ Z-Series Complete Starter Kit is a complete holding system for digital sensors such as Carestream RVG and Shick Elite/33. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Z-Series Complete Starter Kit includes: One Sharing™  One set of Litening Rods™ Eight Assorted Bite Blocks      Size 1 Item # 001-930 Size 2 Item #001-923    

Read more less

    The ClikStik™ is a fully autoclaveable, twin head holder for use with ANY x-ray film or digital sensor bite-blocks. One ClikStik™ system can take anterior, posterior and bitewing views with a simple straight rod and one single ring. Now you can eliminate a multitude of rings and bent rods, and have unlimited versatility for the dental office staff. A complete series of radiographs has become a simple one ring process saving time and money for every office.   The ClikStik™ System includes: (2) ClikStik™  (1) Ring (1) Rod     Item #001-220      

Read more less

    The ShaRing™ Bonus Pack is a holding system for systems. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Bonus Pack includes: One Sharing™  One set of Litening Rods™     Item #001-701      

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    D-Series Sensor Holder Bite Blocks fit sensors such as DEXIS and Gendex Size 2. Precise Fit holders are available in size 1.5 holders. ClikRay™ D-Series bite blocks are colored according to plane so choosing the appropriate holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder  from other manufacturers. D-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.      Posterior Size 1.5 - Lime - Item #001-978 Anterior Size 1.5 - Aqua - Item #001-961 Horizontal BW Size 1.5 - Dark Orange - Item #001-985 Vertical BW Size 1.5 - Dark Orange - Item #001-992        

Read more less

    ClikRay™ Complete Starter Kit for Dexis The ClikRay™ Complete Starter Kit for Dexis is a complete holding system for Dexis and Dexis Platinum sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and endodontic views. It is flexible by design and uses only one autoclave bag for an entire system.  The ClikRay™ complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikRay™ + ClikGuide™ are all you need to get all the images you need. ClikRay™ “D” has a standard horizontal biteplane on one end for both posterior and bitewing views and no biteplane on the other end for anterior and endodontic use. ClikRay™ “DPV” has an enhanced horizontal biteplane for pedodontic as well as endodontic uses along with a vertical biteplane for anterior and vertical bitewing views. ClikRay™ for DEXIS® is available as a system with “D” + “DPV” + “G” ring & rod or separately as 5 packs of “D” or “DPV” holders.   The ClikRay™ Complete Starter Kit for Dexis includes: One ClikRay™ "D" Holder One ClikRay™ "DPV" Holder One ClikGuide™ "G" (Ring + Rod)     Biodegradeable Green - Item #001-510    

Read more less

    The ShaRing™ X-Series Complete Starter Kit is a complete holding system for thinner digital sensors such as Apex, Dentimax, Schick, and XDR. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ X-Series Complete Starter Kit includes: One Sharing™ ** One set of Litening Rods™ Eight Assorted Bite Blocks  **Size 1 & 2 come with both Size 1 ShaRing™ and Size 2 ShaRing™      Size 1 & 2 Item #001-756 Size 1 Item # 001-688 Size 2 Item #001-695    

Read more less

    The ClikStik™ is a fully autoclaveable, twin head holder for use with ANY x-ray film or digital sensor bite-blocks. One ClikStik™ system can take anterior, posterior and bitewing views with a simple straight rod and one single ring. Now you can eliminate a multitude of rings and bent rods, and have unlimited versatility for the dental office staff. A complete series of radiographs has become a simple one ring process saving time and money for every office.   The ClikStik™ System includes: (2) ClikStik™  (1) Ring (1) Rod     Item #001-220      

Read more less

    The ShaRing™ Bonus Pack is a holding system for systems. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ Bonus Pack includes: One Sharing™  One set of Litening Rods™     Item #001-701      

Read more less

    The ComfyRay™ DX 1.5 Plus Complete Starter Kit is a complete holding system for DEXIS digital sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ DX 1.5 Plus complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ DX 1.5 Plus + ClikGuide™ are all you need to get all the images you need.   The ComfyRay™ DX 1.5 Plus Complete Starter Kit includes: (2) ComfyRay™ XT Holders (2) ClikGuide™ "G" (Ring + Rod)     Size 1.5 Light Green - Item #001-206    

Read more less

    ClikRay™ Holder for DEXIS ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder for DEXIS 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "D" - Item #001-480 ClikRay™ "DPV" - Item #001-497      

Read more less

    D-Series Sensor Holder Bite Blocks fit sensors such as DEXIS and Gendex Size 2. Precise Fit holders are available in size 1.5 holders. ClikRay™ D-Series bite blocks are colored according to plane so choosing the appropriate holder is easy. No more confusion! Fits the ClikStik™ as well as nearly every other holder  from other manufacturers. D-Series Sensor Holder Bite Blocks 3-pack includes: (3) bags of Posterior, Anterior, Horizontal, OR Vertical Bite Blocks, Each bag contains 3 Bite blocks.      Posterior Size 1.5 - Lime - Item #001-978 Anterior Size 1.5 - Aqua - Item #001-961 Horizontal BW Size 1.5 - Dark Orange - Item #001-985 Vertical BW Size 1.5 - Dark Orange - Item #001-992        

Read more less

    ClikRay™ Complete Starter Kit for Dexis The ClikRay™ Complete Starter Kit for Dexis is a complete holding system for Dexis and Dexis Platinum sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and endodontic views. It is flexible by design and uses only one autoclave bag for an entire system.  The ClikRay™ complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikRay™ + ClikGuide™ are all you need to get all the images you need. ClikRay™ “D” has a standard horizontal biteplane on one end for both posterior and bitewing views and no biteplane on the other end for anterior and endodontic use. ClikRay™ “DPV” has an enhanced horizontal biteplane for pedodontic as well as endodontic uses along with a vertical biteplane for anterior and vertical bitewing views. ClikRay™ for DEXIS® is available as a system with “D” + “DPV” + “G” ring & rod or separately as 5 packs of “D” or “DPV” holders.   The ClikRay™ Complete Starter Kit for Dexis includes: One ClikRay™ "D" Holder One ClikRay™ "DPV" Holder One ClikGuide™ "G" (Ring + Rod)     Biodegradeable Green - Item #001-510    

Read more less

    The ShaRing™ X-Series Complete Starter Kit is a complete holding system for thinner digital sensors such as Apex, Dentimax, Schick, and XDR. It eliminates the need for multiple rings, rods and pins of older obsolete systems. Now you can have a system without metal pins or rods in your mouth. Save time and money with the complete starter kit. The ShaRing™ is a single ring designed to replace the need for three separate rings used in a full mouth series. Anterior, posterior and bitewing radiographs may now be taken with just one single ring. The ring is completely autoclavable and is compatible with existing metal anterior, posterior and bitewing rods from most manufacturers. It incorporates wire clips for any digital sensor.  ShaRing™ offers rectangular collimation which conforms to European and future standards. Litening rods™ are inexpensive, durable rods that eliminate breakage issues typically seen with metal rods. Litening Rods™ do not have pins that break. Constructed of solid high heat plastic resin, these rods are completely autoclavable, reusable and both low cost and light weight. They have the added benefit of incorporating a wire clip to accommodate the latest in digital sensors and work with any standard anterior, posterior or bitewing ring in addition to ShaRing™. The rods autoclave all in one bag with your holders.   The ShaRing™ X-Series Complete Starter Kit includes: One Sharing™ ** One set of Litening Rods™ Eight Assorted Bite Blocks  **Size 1 & 2 come with both Size 1 ShaRing™ and Size 2 ShaRing™      Size 1 & 2 Item #001-756 Size 1 Item # 001-688 Size 2 Item #001-695    

Read more less

    The ComfyRay™ XT Skinny Complete Starter Kit is a complete holding system for thinner digital sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ XT Skinny complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ XT Skinny + ClikGuide™ are all you need to get all the images you need.   The ComfyRay™ XT Skinny Complete Starter Kit includes: (2) ComfyRay™ XT Holders (2) "G" ClikGuide™ (Ring + Rod)     Size 1 Rose - Item #001-800 Size 2 Light Blue - Item #001-794    

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "01" - Size 0, 1 - Item #001-053 ClikRay™ "U" - Size 2 - Item #001-015      

Read more less

    ClikGuide™ "G" patented simplicity assists in taking accurate x-rays the first time leading to patient comfort and compliance. ClikGuide™ requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ClikGuide™ + ClikRay™ are all you need to get all the images you need. ClikGuide™ “R” is a breakthrough in holder technology. The patent pending design allows the use of only the bitewing rod and ring of existing systems such as Dentsply/Rinn™.  ClikGuide™ “R” requires only one ring and one rod which moves into any position. Now you can use your existing systems to benefit from any ClikRay™ holder. ClikGuide™ “G” fits ALL ClikRay™ and ClikBite™ products  ClikGuide™ “R” fits ALL ClikRay™ and ClikBite™ products and uses existing ring systems   ClikGuide™2-pack includes: (2) ClikGuide™ "G" or "R"     "G" Ring/Rod - Yellow/White - Item #001-022 "R" Adapter - Dark Yellow - Item #001-169      

Read more less

    The ComfyRay™ XT Skinny Complete Starter Kit is a complete holding system for thinner digital sensors. It eliminates the need for bite blocks, multiple rings, rods and pins of older obsolete systems. The complete starter kit allows you to use one holder for anterior, posterior, vertical & horizontal bite wings, and Endo. The unique Shark Fin Biteplane design allows the holder to slip around the rubber dam clamp. It is flexible by design and uses only one autoclave bag for an entire system.  The ComfyRay™ XT Skinny complete starter kit includes the ClikGuide™, which requires only one ring which rotates into three positions. It also slides closer to the sensor to achieve accurate beam position. The ease of use and simple design requires far fewer instruments to complete a full mouth series of digital radiographs. ComfyRay™ XT Skinny + ClikGuide™ are all you need to get all the images you need.   The ComfyRay™ XT Skinny Complete Starter Kit includes: (2) ComfyRay™ XT Holders (2) "G" ClikGuide™ (Ring + Rod)     Size 1 Rose - Item #001-800 Size 2 Light Blue - Item #001-794    

Read more less

    ClikRay™ Holder ClikRay™ is a fully autoclaveable holder for all digital sensors. Unlike other holders, ClikRay™ exerts no damaging pressure on sensitive sensors--no clamping is necessary. It is comfortable for the patient, as there are no bulky pieces or sharp edges. It has a sensible design which allows easy sensor placement with a rapid learning curve. Anyone familiar with current accepted radiographic techniques can use ClikRay™.   The ClikRay™ Holder 5-pack  includes: (5) ClikRay™ Holders   ClikRay™ "01" - Size 0, 1 - Item #001-053 ClikRay™ "U" - Size 2 - Item #001-015      

Read more less